SUM50
Submersible electro-pump for sump
APPLICATIONSSubmersible pump.Ideal for draining clean water without suspended solids.
TECHNICAL CHARACTERISTICSMotor: 2900 rpm, cooled by pumped water.Safety class: IP-X8.Insulation: B.Shaft: Stainless steel AISI 420.Pump Body: Polypropylene.Impeller: Noryl.Mechanical seal: Ceramic / Graphite.Electric cable: H07RN-F with Schuko plug x 10 m.Max. temperature: 35ºC.Passage of solids: Ø 5mm.Max. immersion depth: 5 mNota: Level swtich, hose fitting and thermal protection included.
SUM100W
Submersible electro-pump for sump and loaded water
APPLICATIONSSubmersible electropump.Widely used for bailing out rainwater, flood in cellars and pumping slightly dirty water.
TECHNICAL CHARACTERISTICSMotor: 2900 rpm, cooled by pumped waterSafety class: IP-X8Insulation: B.Shaft: Stainless steel AISI 420.Pump Body: Polypropylene.Impeller: Noryl.Mechanical seal: Ceramic / Graphite.Electric cable: H07RN-F with Schuko plug x 10 m.Max. temperature: 35ºC.Passage of solids: Ø 25mm.Max. immersion depth: 5 mNota: Level switch, hose fitting and thermal protection included.
SX50
Submersible electro-pump for sump
APPLICATIONSSubmersible pump.Ideal for draining clean water without suspended solids.
TECHNICAL CHARACTERISTICSMotor: 2900 rpm, cooled by pumped water.Safety class: IPX8.Insulation: B.Shaft and Pump Body: Stainless steel AISI 420.Impeller: Noryl.Mechanical seal: Ceramic / Graphite.Electric cable: H07RN-F with Schuko plug x 10 m.Max. temperature: 35ºC.Passage of solids: Ø 5mmMax. immersion depth: 5 m.Nota: Level switch, hose fitting and thermal protection included.
SX100W
Submersible electro-pump for sump and loaded water
APPLICATIONSSubmersible electropump.Widely used for bailing out rainwater, flood in cellars and pumping slightly dirty water.
TECHNICAL CHARACTERISTICSMotor: 2900 rpm, cooled by pumped waterSafety class: IP-X8.Insulation: B.Shaft and Pump Body: Stainless steel AISI 420.Impeller: Noryl.Mechanical seal: Ceramic / Graphite.Electric cable: H07RN-F with Schuko plug x 10 m.Max. temperature: 35ºC.Passage of solids: Ø 25mm.Max. immersion depth: 5 m.Nota: Level switch, hose fitting and thermal protection included.
SRV
Submersible electro-pump for residual water
APPLICATIONSSubmersible electropump.Suitable for baling out rain water, waste water and lifting loaded waters.
TECHNICAL CHARACTERISTICSMotor: 2850 rpm, cooled by dielectric oil and pumped water.Safety class: IP-68.Insulation: B.Pump body, support base, top cover and impeller: Cast iron.Shaft, ext. cladding, handle and screws: Stainless steel.Mechanical seals (double): Ceramic / Graphite.Electric cable: 10 m. H07RN-F.Max. temperature: 35ºC.Passage of solids: Ø 25mm.Max. immersion depth: 8 m. (SRV-100M) / 10 m. (SRV-200M).Admitted pH: 6 to 8.Nota: Level switch, hose fitting and thermal protection included.
GRINDER
Submersible electropump with grinder system
APPLICATIONSSubmersible electropump with grinding system.Suitable for baling out domestic waste water with suspended solids.
TECHNICAL CHARACTERISTICSMotor: 2850 rpm, cooled by dielectric oil and pumped water.Safety class: IP-68.Insulation: B.Pump body, support base, top cover, impeller and grinding system: Cast iron.Shaft, sleeve, handle and screws: Stainless steal.Mechanical seals (double): Ceramic / Graphite.Electric cable: 10 m. 3x1,5mm2.Max. temperature: 35ºC.Max. immersion depth: 8 m.Admitted pH: 6 to 8.Nota: Level switch, hose fitting with 90º elbow and thermal protection included.
