BM
Multistage electropumps
APPLICATIONSHorizontal multistage electropumps. Recommended for domestic pressure groups and irrigations.
TECHNICAL CHARACTERISTICSMotor: 2900 rpm, closed motor with external ventilation.Safety class: IP-55.Insulation: F.Shaft: AISI 304 Stainless steel.Pump and union body: Cast iron.Impellers: Noryl.Diffusers: Noryl + stainless steal ringMechanical seal: Ceramic / Graphite.Max. temperature: 40ºC.Thermal protection and electrical cable with SCHUKO-M connector included.Nota: Our pressure groups can be mounted with this model: GP - BM/AQUACONTROL-MC, GP - BM/RP90.
CM
Pump with single impeller of medium flow rate
APPLICATIONSPump with single impeller of medium flow rate. Recommended for sprinkler irrigations, pressure groups and industry.
TECHNICAL CHARACTERISTICSMotor: 2900 rpm, closed motor with external ventilation.Safety class: IP-55.Insulation: F.Pump body: Cast iron.Union body: Aluminium alloy.Impeller: Noryl.Shaft: AISI 304 Stainless steel.Mechanical seal: Ceramic / Graphite.Max. temperature: 40ºC.Thermal protection included.Nota: Our pressure groups can be mounted with this model: GP - CM/AQUACONTROL-MC, GP-CM/RP90.
RG
Pump of high flow rate
APPLICATIONSPump of high flow rate and low pressure.Suitable for drip irrigation, open channels and recirculations.
TECHNICAL CHARACTERISTICSMotor: 2900 rpm, closed motor with external ventilation.Safety class: IP-54.Insulation: F.Pump body and union body: Cast iron.Impeller: Brass.Shaft: AISI 304 Stainless steel.Mechanical seal: Ceramic / Graphite.Max. ambient temp.: 40ºC.Max. fluid temp.: 80ºC.Nota: Thermal protection included.
JET
Self-priming jet pump
APPLICATIONSSelf-priming jet pump recommended for small irrigations and pressure groups. Maximum suction depth is 7m.
TECHNICAL CHARACTERISTICSMotor: 2900 rpm, closed motor with external ventilation.Safety class: IP-44.Insulation: F.Shaft: AISI 304 Stainless steel Pump body and motor bracket: Cast iron.Impeller: Noryl (100M) / Brass (150M).Diffuser: Noryl (100M) / Cast iron (150M).Venturi: Noryl.Mechanical seal: Ceramic / GraphiteMax. temperature: 35ºC.Thermal protection and electrical cable with SCHUKO-M connector included.Nota: Our pressure groups can be mounted with this model: GP - JET/AQUACONTROL-MC, GP-JET/RP90.
JETINOX
Self-priming jet pump
APPLICATIONSSelf-priming jet pump recommended for small irrigations and pressure groups.Maximum suction depth is 7 m.
TECHNICAL CHARACTERISTICSMotor: 2900 rpm, closed motor with external ventilation.Safety class: IP-44.Insulation: F.Shaft and pump body: AISI 304 Stainless steel.Motor bracket: Cast iron.Impeller, diffuser, venturi and pump cover: Noryl.Mechanical seal: Ceramic / Graphite.Max. temperature: 35ºC.Thermal protection and electrical cable with SCHUKO-M connector included.Nota: Our pressure groups can be mounted with this model: GP - JETINOX/AQUACONTROL-MC, GP - JETINOX/RP90.
DJ
Self-priming electro-pumps
APPLICATIONSSelf-priming electro-pumps for deep suctions with double pipe up to 45 m. through ejector.
TECHNICAL CHARACTERISTICSMotor: 2900 rpm, closed motor with external ventilation.Safety class: IP-54.Insulation: F.Pump body and union body: Cast iron.Shaft: AISI 304 Stainless steel .Impeller and diffuser: Noryl.Ejector: Cast iron.Mechanical seal: Ceramic / GraphiteMax. temperature: 35ºC.1¼” prolongation pipe, electrical cable with SCHUKO-M connector and thermal protection on included.Nota: Our pressure groups can be mounted with this model: GP - DJ/AQUACONTROL-MC, GP-DJ/RP90.
PE
Peripheral self-priming pumps
APPLICATIONSPeripheral pump. Widely used for systems with limited flows and high pressures.Maximum suction depth is 7 m.
TECHNICAL CHARACTERISTICSMotor: 2900 rpm, closed motor with external ventilation.Safety class: IP-44.Insulation: F.Shaft: Stainless steel.Pump body and union body: Cast iron.Impeller: Brass.Impeller-body seal faces: Brass.Mechanical seal: Ceramic / Graphite.Max. water temp.: 80ºC.Max. ambient temp.: 40ºC.Thermal protection and electrical cable with SCHUKO-M connector included.Nota: Our pressure groups can be mounted with this model: GP - PE/AQUACONTROL-MC, GP-PE/RP90.
VE
Vertical multicellular electro-pumps
APPLICATIONSVertical-shaft multistage electropumps.Suitable for any pressure equipments thanks to their position and small size.
TECHNICAL CHARACTERISTICSMotor: 2850 rpm, closed motor with external ventilation.Safety class: IP-44/55.Insulation: F.Shaft and pump housing: ‘AISI 304’ Stainless steel.Suction and discharge body: Cast iron.Impellers and diffusers: Noryl.Mechanical seal: Ceramic / Graphite.Max. temperature: 35ºC.Supplied with corresponding counter flanges, screws and joints.Nota: Our pressure groups can be mounted with this model GPD and GPDVAR.
