LINCE
Self-priming electro-pumps for swimming-pools
APPLICATIONSSelf-priming electropump with prefilter, recommended for swimming pool depuration groups.
TECHNICAL CHARACTERISTICSMotor: 2900 rpm, closed motor with external ventilation.Safety class: IP-55.Insulation: F.Shaft: AISI 420 Stainless steel.Pump body, impeller, diffuser and union body: Polypropylene with fiberglass.Mechanical seal: Silicon / Graphite (Si/Gr).Max. temperature: 60ºC.Thermal protection and fittings set for gluing included.
GPVF
Compact pressure group with built-in variable frequency drive
APPLICATIONSCompact pressure group with built-in variable frequency drive.Ideal for constant pressure supply regardless of water demand.It allows energy savings of 30-60% compared to conventional pressure equipment.
TECHNICAL CHARACTERISTICSSafety class: IP-55.Insulation: F.Max. temperature: 90ºC.All components in contact with water are made of stainless steel.
COMPOSITIONMULTINOX 130/5 Pump.Variable frequency drive.Hydropneumatic tank 2L.5 Way raccord.Pressure transducer.Retention valve (integrated in the raccord).Manometer 0-10 BAR.
WELL
Submersible electropumps for wells
APPLICATIONSMultistage submersible electropumps widely used for its installation in tanks and open wells.
TECHNICAL CHARACTERISTICSMotor: 2850 rpm, cooled by pumped water.Safety class: IP-68.Insulation: B.Shaft, sleeve, impulsion body and suction grid: Stainless steel.Impellers and diffusers: Noryl.Mechanical seals (double): Ceramic / GraphiteElectric cable: 15 m. 4x1mm2.Max. temperature: 35ºC.Max. immersion depth: 20 m.Sand content: 40 g/m3 max.Admitted pH: 6,5 to 8,5.All models include level switch and built-in CONTROLBOX with ON/OFF switch, capacitor and circuit breaker.
MULTICOM
Submersible automatic electro-pumps 4
APPLICATIONSMultistage submersible electro-pump with built-in pressure control device for automatic start and stop.
TECHNICAL CHARACTERISTICSMotor: 2850 rpm, cooled by pumped water.Safety class: IP-X8.Insulation: B.Shaft, sleeve, suction grid: Stainless steel.Impellers, diffusers and pump base: Plastic.Mechanical seal (double): Silicon Carbide/Graphite+Ceramic/Graphite.Electric cable: 3 m. 3x1mm2.Max. temperature: 35ºC.Max. immersion depth: 20 m.Sand content: 150 g/m3 max.Provided with rope of 20 m. to hold.Capacitor integrated inside the pump.
OPERATIONStart pressure: 3,2 BAR.Stop pressure: 5,0 BAR.Protection against lack of water included (without level switch) with automatic restart and protection for leak detection in the facility.It is necessary to install it with an hydropneumatic tank for proper functioning.No external check valve must be mounted.
BRUSH
High pressure-washer electropump
APPLICATIONSSmall portable piston electropump for high pressure. This pressure-washer can be used for any domestic cleaning task.
CHARACTERISTICSON/OFF switch and automatic stop system included, which stops the pressure-washer when the gun's trigger is not pressed.
ACCESSORIES3 m. High-pressure hose.Manual gun.Lance for gun.Lance's extension.Soap tankConnection fittings set
SRV100
Submersible electro-pump for residual water
APPLICATIONSSubmersible electropumpSuitable for baling out rain water, waste water and lifting loaded waters.
CARACTÉRISTIQUES TECHNIQUESMoteur: 2850 rpm, refroidi par huile diélectrique et l’eau pompée.Degré de protection: IP-68.Classe d’isolation: B.Corps de pompe, base de support, couvercle supérieur et turbine: Fonte.Arbre, chemise, anse et boulons: Acier inoxydable.Garnitures mécaniques (double): Céramique/Graphite.Câble élect.: 10 m. H07RN-F.Température maximale: 35°C.Passage solides: Ø 25 mm.Immersion maximale: 8 m. (SRV-100M)/10 m. (SRV-200M).pH admis: 6 à 8.Nota: Régulateur de niveau, raccord tuyau d’arrosage et protection thermique compris.
