Submersible pumps for loaded water
The submersible pumps for loaded water have very separated turbines for the passage of suspended solids and are ideal for pumping dirty water, wastewater, sewage, industrial, agricultural, septic tanks, sewage treatment plants, etc.
- Submersible pumps for loaded water SUM100W range with polypropylene body and built-in level switch ideal for bilge rainwater, flooded basements and pumping sewage.
- Submersible pumps for loaded water SX100W range with stainless steel body and built-in level switch ideal for bilge rainwater, flooded basements and pumping sewage.
SUM100W
Submersible electro-pump for sump and loaded water
APPLICATIONS
- Submersible electropump.
- Widely used for bailing out rainwater, flood in cellars and pumping slightly dirty water.
- Motor: 2900 rpm, cooled by pumped water
- Safety class: IP-X8
- Insulation: B.
- Shaft: Stainless steel AISI 420.
- Pump Body: Polypropylene.
- Impeller: Noryl.
- Mechanical seal: Ceramic / Graphite.
- Electric cable: H07RN-F with Schuko plug x 10 m.
- Max. temperature: 35ºC.
- Passage of solids: Ø 25mm.
- Max. immersion depth: 5 m
SX100W
Submersible electro-pump for sump and loaded water
APPLICATIONS
- Submersible electropump.
- Widely used for bailing out rainwater, flood in cellars and pumping slightly dirty water.
- Motor: 2900 rpm, cooled by pumped water
- Safety class: IP-X8.
- Insulation: B.
- Shaft and Pump Body: Stainless steel AISI 420.
- Impeller: Noryl.
- Mechanical seal: Ceramic / Graphite.
- Electric cable: H07RN-F with Schuko plug x 10 m.
- Max. temperature: 35ºC.
- Passage of solids: Ø 25mm.
- Max. immersion depth: 5 m.
