+34 902 918 855
  • Facebook
  • Twitter
  • LinkedIn
  • YouTube
  • Español
  • Français
  • English

Submersible pumps for drainage

The submersible pumps for drainage can be used for bailing rainwater, drains, ponds or water slightly loaded or for the bilge of water loaded with particles or suspended solids, depending on its hydraulic design.

  • Submersible pumps for drainage of clean or slightly dirty water with polypropylene body SUM50 range, small-sized, simple and with built-in level switch.
  • Submersible pumps for drainage ofclean or slightly dirty water with stainless steel body SX50  range, small-sized, simple and with built-in level switch.

SUM50

Submersible electro-pump for sump

APPLICATIONS
  • Submersible electropump, widely used for bailing out rainwater, flood in cellars and for lifting dirty water.
TECHNICAL CHARACTERISTICS
  • Motor: 2900 rpm, cooled by pumped water.
  • Safety class: IP-X8.
  • Insulation: B.
  • Shaft: Stainless steel.
  • Pump Body: Polypropylene.
  • Impeller: Noryl.
  • Mechanical seal: Ceramic / Graphite.
  • Electric cable: H07RN-F with Schuko plug x 10 m.
  • Max. temperature: 35ºC.
  • Passage of solids: Ø 5mm.
  • Max. immersion depth: 5 m
  • Level swtich, hose fitting and thermal protection included.

SX50

Submersible electro-pump for sump

APPLICATIONS
  • Submersible electropump, widely used for bailing out rainwater, flood in cellars and for lifting dirty water.
TECHNICAL CHARACTERISTICS
  • Motor: 2900 rpm, cooled by pumped water.
  • Safety class: IPX8.
  • Insulation: B.
  • Shaft and Pump Body: Stainless steel.
  • Impeller: Noryl.
  • Mechanical seal: Ceramic / Graphite.
  • Electric cable: H07RN-F with Schuko plug x 10 m.
  • Max. temperature: 35ºC.
  • Passage of solids: Ø 5mm
  • Max. immersion depth: 5 m.
  • Level switch, hose fitting and thermal protection included.


Valid HTML5 ¡CSS Válido!